With the AppGate solution for Mobile Phones and PDAs the device is turned into something that more resembles a PC then an ordinary phone. Without problems the users can now access their e-mail account and reach their their Intranet much the same way as they would do on their PC. The information is send directly to device and do not pass any third parties and is always encrypted. There is no need for installation of new e-mail clients or additional web-browsers.

The user can authenticate themselves the same way that they usually do, using passwords, tokens etc.

In this guide assumes that the user authenticates using passwords, there are other authentication methods supported as well. Please contact your system administrator for more information.

The Sony Ericsson P910i Smart phones can be used together with an AppGate Security Server to achieve secure communication to E-mail servers located on an organisations internal networks.

Prerequisites

1. A Username and Password for the AppGate Security Server. This should be obtained from the administrator of the AppGate Security Server.
2. IP-number or hostname of the AppGate Security Server.
3. A Username and Password for the E-mail account on the E-mail server (Exchange server). You may already have this information if you have previously used the same E-mail server, otherwise you should obtain this from the administrator of the E-mail server.
4. The E-mail address of your E-mail account.
5. Information on which of POP3 or IMAP the E-mail server can handle or prefers.
6. A P800/P900 or P910 with a GSM subscription with GPRS enabled which must provide plain IP-access to the Internet. Warning: There are certain GPRS subscriptions that are limited to web traffic only. Those will not work; make sure you have full IP-access.

The easiest way to install the AGCMobile.SIS is via the Web and through the Internet using the P910i GPRS/Internet connection. On the P910i:

1. Among all the Applications select Internet.
2. In the menu select "Internet -> Open page"
3. In the Location field type: http://www.appgate.com/downloads/AGCMobile.SIS
4. Observe that upper and lowercase characters are significant.
5. When you press "Open" the AGCMobile.SIS will be downloaded to your phone. Follow the instructions to install it as a new application.
6. When the installations is finished you should be able to find a new application called AppGate mobile client

In order for your phone to be able to handle E-mail it must be told a few things about your E-mail account. Do as follows:

1. Choose "Control panel" and then "Messaging accounts"
2. At the tab "Email" press "New"
3. At the tab "Basic" fill in something in the field "Account name:" e.g. "My Email"
4. Fill in "Your name:"
5. Fill in your Email address Select "Connection type" POP3 or IMAP
6. Select the tab "Inbox" and give the Username and Password for the E-mail account.
7. Set "Incoming server address" to 127.0.0.1
8. Select the tab "Outbox" and set "Outgoing server address" to 127.0.0.1
9. Check "Use SMTP authentication" and check "Use Inbox login details".
10. Press "Done" and the E-mail account is ready.

1. Start the "AppGate mobile client".
2. In the "Server" field give the AppGate Security Server IP-number or hostname.
3. Give your username for the AppGate Security Server.
4. Set "Authentication" to "Password".
5. Give your password.
6. Press "Connect"

AppGate mobile client will now establish a secure, encrypted and compressed connection with the AppGate Security Server. You may encounter a few questions about what Internet connection you want use and, at the first time, a question about accepting the AppGate Security Server "Host Key".

When the phone is connected to the Security Server it is indicated by the text "Connected" on the screen.

Using E-mail:

1. Start the application "Messaging"
2. Select your newly created E-mail account, e.g. "My Email" under AppGate You are now communicating with the E-mail account in a secure way and can get and send E-mails as you like.

Roaming

All the AppGate clients have a unique feature called Roaming, which is very useful when using GPRS/3G. The Roaming feature will maintain the secure connection with the Security Server even if the GPRS connection is temporary lost or inactivate. You will remain logged in on the AppGate Security Server while the client do "Suspend" and "Resume". This will save you from tedious login/password dialogues and unnecessary GPRS traffic. The AppGate client will automatically do "Suspend" after a while of inactivity The AppGate client will automatically do "Resume" if the E-mail reader tries to get or send E-mail.

Using Web/intranet

If your AppGate Security Server is setup for access to an intranet web site you may access it this way:

1. Start the application "web"
2. Enter the address: http://127.0.0.1

This requires you to have an AppGate Security Server which has the Sync4j Module installed and configured. Contact your sys admin before you try this.

1. Enter the "Tools" folder on the desktop and start the "Sync" application.
2. Edit the listed synchronisation profile.
3. Set the "Connection type" to "Internet".
4. The "Access point" should be set to the Internet access method you will use, probably the same one as used for e-mail.
5. Set "Host address" to "127.0.0.1/sync4j/sync"
6. Set the "Port" to "8090".
7. Go to the "User" panel and configure your Exchange server user name and password. Disable "HTTP authentication" .
8. Go to the "Contents" panel.
9. Enable "Contacts" synchronisation (by changing it to "Yes" (Ja)) and open the settings window.
10. On the settings window for contacts configure the "Remote database" to "./contacts".
11. Go back to the Contents panel by pressing "Done".
12. Enable "Calendar" synchronisation (by changing it to "Yes" (Ja)) and open the settings window.
13. On the settings window for calendar configure the "Remote database" to "./calendar".

Performing a remote sync

Log in with the AppGate client before synchronising. The AppGate client may be in the suspended mode if it is configure to resume automatically (which it is by default).

To perform a synchronisation just open the "Sync" application, under "Tools", and select "Sync".